Lab-Equipment > Baths-and-Circulators > Heating-Circulating-Baths > 6 Hole Thermostatic Bath LD-LOTB-A21
Features
- Surface electrolysis treated water sink
- Cold rolled steel plate outer shell
- Touch button temperature setting
- Automated stop
- Multi section programme control
- Thermal resistor sensor
- Three digit temperature display
- Over temperature alarm , short-circuit protection
- Automated back-up and retrieval in case of power off
6 Hole Thermostatic Bath LD-LOTB-A21
6 Hole Thermostatic BathLD-LOTB-A21is a 18.6 L bottom heating bath with a temperature range of 5 °C ~ 100 °C. Water sink is surface electrolysis treated with cold rolled outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use controls allow the user to monitor and set temperature and time. Easy to use functions like deviation correction, menu key lock, power failure backup and restoration of parameters on power off included.
SKU Code: LD-LOTB-A21
Also Available in below capacities
Volume : 3.3 L
Volume : 6.3 L
Volume : 12.8 L
Volume : 12 L
Volume : 19.3 L
Volume : 18.6 L
- Specifications
- Product Applications
| Rows | 2 |
| Holes | 6 |
| Power | 1200 W ; AC 220 V |
| Timer | 0 ~ 999 min |
| Heater | U type heating tube |
| Sensor | Thermal resistor |
| Volume | 18.6 L |
| Programme | Multi-section program control |
| Net weight | 8 kg |
| Outer shell | Cold rolled steel plate |
| Heating mode | Bottom heating |
| Power supply | 50 / 60 Hz |
| Cover material | PP plastic |
| Cover apperture | ᴓ 120 mm |
| Timing function | Fixed temperature ( auto stop ) |
| Inner water sink | Electrolysis treated |
| Temperature range | RT + 5 °C ~ 100 °C |
| Temperature motion | ± 0.5 °C |
| Cover number per hole | 5 |
| Temperature resolution | 0.1 °C |
| Temperature uniformity | ± 1 °C |
| Temperature control mode | PID |
| Temperature display mode | 3 – digit display |
| Temperature setting mode | Touch mode |
| Internal dimension ( W x L x H ) | 470 x 305 x 130 mm |
| External dimension ( W x L x H ) | 510 x 350 x 210 mm |
| Used in tissue culture application, enzyme reaction studies, growth observation studies, fermentation analysis, incubate samples etc. |
