Online Conductivity Controller LD-LOCC-A10
SKU: LD-LOCC-A10Online Conductivity ControllerLD-LOCC-A10features 3 points conductivity calibration system, TDS measurement mode, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, Temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. This controller measures Conductivity and TDS values in µS/ cm, and mS/ cm units.
- ✓ Equipped with industrial conductivity electrode
- ✓ 1 to 3 conductivity calibration points, 1 temperature calibration point
- ✓ Selectable temperature units °C or °F for diff. applications
- ✓ System menu allows setting of up to 9 parameters
- ✓ Reset features to resumes all setting back to default
- ✓ ATC mode for accurate readings over entire range
- ✓ Low and high alarm limits set automatically activate an external device
- ✓ Manual temperature calibration improves accuracy
Also available in:
Conductivity measurement range : 0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
| Load | Max. 500 Ω |
| Power | DC 24 V |
| Weight | 350 g |
| Display | LCD |
| Interface | RS485 |
| TDS factor | 0.1 to 1.0 |
| TDS accuracy | ±1 % F.S. |
| Cell constant | K= 0.1, 1, 10 |
| Signal output | 4 to 200 mA |
| Dimension (L*W*H) | 96 × 96 × 75 mm |
| Connection terminals | Detachable screw terminals |
| Temperature accuracy | 1°C |
| Conductivity accuracy | ±1 % F.S. |
| Reference temperature | 25°C |
| TDS measurement range | 0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt) |
| Temperature resolution | 0.1°C |
| Conductivity resolution | 0.001/ 0.01/ 0.1/ 1 |
| Environmental conditions | Ambient temperature to ≤ 60°C, RH ≤ 80% |
| Temperature compensation | Automatic, 0 to 100°C , 32 to 212°F |
| Low and high alarm limits | 0.02 uS/ cm to 20.0 mS/ cm, selectable |
| Temperature measurement range | 0 to 100°C, 32 to 212°F |
| Conductivity measurement range | 0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm |
| Temperature calibration range | Measured value ± 10°C |
| Temperature calibration points | 1 point |
| Conductivity calibration points | 1 to 3 points |
| Conductivity calibration solutions | 84 µS/ cm, 1413 µS/ cm, 12.88 mS/ cm,111.8 mS/ cm |
Used to measure conductivity and TDS values required for quality checking and research purpose across water treatment plants, filtration units, RO treatment plants, Agriculture industry, Aquaculture industry and others.
Similar Products
Portable Ion Meter LPIM-A10
✓ pH Range : -2.000 to 20.000 pH
✓ pH Resolution : 0.001 / 0.01 / 0.1, selectable
Portable Turbidity Meter LTM-A10
✓ Measuring range (NTU) : 0 to 200
✓ Minimum readout value (NTU) : 0.1
Portable Turbidity Meter LTM-A11
✓ Measuring range (NTU) : 0 to 100,0 to 200
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A12
✓ Measuring range (NTU) : 0 to 100,100 to 400
✓ Minimum readout value (NTU) : 0.01, 0.1
Portable Turbidity Meter LTM-A13
✓ Measuring range (NTU) : 0 to 100,100 to 500
✓ Minimum readout value (NTU) : 0.01, 0.1
