Automatic Distillation Apparatus LD-LADA-A10
SKU: LD-LADA-A10Automatic Distillation ApparatusLD-LADA-A10is a benchtop unit which can automatically determine the distillation range of petroleum products. Test procedures like heating, distillation speed and recording the data are fully automated. Large LCD display and easy to handle operations makes it highly convenient to use. It complies with ASTM D86 and IP123 standards.
- ✓ 10'' LCD touch screen to view and pre-set several parameters
- ✓ Highly advance level tracking system with American Haydon high-stepping linear motor
- ✓ Imported integral linear ball screw circumferential positioning laser tracker
- ✓ Imported Danfoss (Secop) Compressor
- ✓ Mechanically refrigerated cooling tube and cylinder room
- ✓ Automatic heating control (distillation process): up to 95% sample heating control with controlled flow rate of 4 to 5 ml/min
- ✓ Display shows initial and final boiling point temperature, various % temperature and flow rate
- ✓ Automatic correction of local atmospheric pressure to standard atmospheric pressure
- ✓ Test process is stopped by temperature of steam
- ✓ Results can be stored and printed
Also available in:
Graduated flasks : 10 ml and 100 ml
Ambient temperature : (-10) °C ~ 35 ℃
Graduated flasks : 100 ml
Ambient temperature : 5 °C ~ 35 ℃
Distillation flask : 125 mL
Graduated flasks : 100 ml
| Power | AC 220 V ± 10% 50 Hz |
| Cooling power | 0.5 kW |
| Heating power | 2 kW |
| Volume accuracy | ± 0.1 ml |
| Oven temperature | 0 to 500℃ |
| Steam temperature | 0 to 400℃ |
| Refrigeration accuracy | ± 1℃ |
| Refrigeration temperature | 0 to 60℃ |
| Temperature measurement accuracy | ± 0.1℃ |
It is widely used to determine the distillation range of various petroleum products in laboratories, research institutes and industries.
Similar Products
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
